激光晶体Nd:YVO4的形貌及生长缺陷

本文报道了应用环境扫描电镜（ESEM）和同步辐射X射线白光形貌术对采用提拉法生长出的Nd:YVO4晶体进行的形貌及生长缺陷的分析,获得了该晶体的开裂表面的ESEM形貌像以及取自晶体肩部和中间部位的（001）面的同步辐射白光形貌像,观察到了位错、包裹物等缺陷,可为生长高质量的Nd:YVO4晶体提供重要的启示.     

电子束和接触式曝光机的混合曝光技术

Ⅰ线光致抗蚀剂可以同时实用电子束和光学系统曝光，在50kV加速电压下，其曝光剂量为50-100μC/cm^2，曝光后在0.7%NaOH溶液内显影1分钟。其灵敏度比PMMA快5倍，分辩率为0.5μm。采用两方法制备CaAsPHEMT：一种用Ⅰ线光致抗蚀剂，对源、漏及栅全部都采用电子束曝光，制备了0.5μm栅长的GaAs PHEMT；另一种将源、漏及栅分割成两部分，其中精细部分由电子束曝光，其余部分由光学系统曝光，用这种方法制备了0.25μm栅长的GaAs PHEMT。Ⅰ     

Si1-xGex/Si应变材料的生长及热稳定性研究

利用分子束外延（MBE）技术生长了Ge组份为0.1-0.46的Si1-xGex外延层。X射线衍射线测试表明，SiGe/Si异质结材料具有良好的结晶质量和陡峭界面，其它参数与可准确控制。通过X射线双晶衍射摆曲线方法，研究了经700℃、800℃和900℃退火后应变SiGe/Si异质结材料的热稳定性。结果表明，随着退火温度的提高，应变层垂直应变逐渐减小，并发生了应变弛豫，导致晶体质量退化；且Ge组分越小，Si1-xGex应变结构的热稳定性越好；室温下长时间存放的应变材料性能稳定。     

步进式加热炉钢坯跑偏测试

钢坯在炉内的横向跑偏和纵向跑偏位移量,是步进式加热炉设备的重要性能之一.重点介绍了鞍钢1780热连轧生产线步进式加热炉钢坯跑偏测试的应用技术.     

8Li次级束的产生

在北京串列加速器次级束流线上通过2 H(7Li,8Li) 1H逆运动学反应产生了用于核天体物理研究的8Li次级束。准直后的次级束纯度达到 80 %以上 ,对于 44MeV的7Li强度约为 3 0s- 1·pnA- 1,可以用来进行逆几何转移反应的实验测量。     

High temperature controlled atmosphere experiments for catalysts in a transmission electron microscope

A new transmission electron microscopy (TEM) specimen preparation procedure for high temperature experiments using a controlled atmosphere specimen holder (HTCASH) has been developed. It is designed for studying the microstructure of catalyst specimens before and after treatments in various gases. The procedure involved (1) finding a new formula for the embedding material, (2) devising a new method of making specimen supports, and (3) developing a method for removing the embedding material after the specimen has been microtomed. These techniques were then brought together to produce the ideal specimens for the HTCASH experiments. As an extra benefit, this procedure is also suitable for preparing specimens for ultrahigh resolution imaging experiments. The application of the new procedure in HTCASH experiments is illustrated through a high temperature reduction of a Co/SiO₂-923 catalyst.     

Effects of modeling means on properties of monitoring models of spot welding quality

Analyzing and modeling the relation between monitoring information during welding and quality information of the joints is the foundation of monitoring resistance spot welding quality. According to the means of modeling, the known models can be divided into three large categories: single linear regression models, multiple linear regression models and multiple non-linear models. By modeling the relations between dynamic resistance information and welding quality parameters with different means, this paper analyzes effects of modeling means on performances of monitoring models of resistance spot welding quality. From the test results, the following conclusions can be drawn: By comparison with two other kinds of models, artificial neural network (ANN) model can describe non-linear and high coupling relationship between monitoring information and quality information more reasonably, improve performance of monitoring model remarkably, and make the estimated values of welding quality parameters more accurate and reliable.     

蓝疆号起重铺管船托管架拖挂结构的质量及进度控制

蓝疆号起重铺管船是一艘集起重、管道铺设于一身的多功能新型船舶,在铺管作业系统中,设有一连接船体与托管架的独立结构——拖挂结构。介绍这个由特厚高强钢板组焊而成的结构在制造过程和现场施工中的质量控制及进度控制,供从事工程管理人员参考。     

MB8镁合金薄板的搅拌摩擦焊

针对我国航空航天工业常用的MB8镁合金。采用搅拌摩擦焊工艺进行焊接，对其焊缝的成形特点、组织特征和力学性能进行分析。结果表明，采用搅拌摩擦焊焊接镁合金效果良好。